AFTER A LOT OF HEAD EACH, I DID IT! THIS IS A TUTORIAL FOR THOSE WHO WANTS INSALL THE DAVINCI RESOLVE ON CENTOS7!
THIS IS ONLY FOR PEOPLE WHO HAS A NVIDIA VIDEO CARD
[INSTALL TUTORIAL]
[DaVinci Resolve 14]
[Linux version - CentOS 7]
[GPU: NVidia]
Let's do it as fast as possible (looks a lot but is not, u can do it REALLY fast):
1 - Download your GPU Nvidia Driver:
http://www.nvidia.com/Download/index.aspx?lang=en-us
2 -Update your system. Open terminal and type:
yum update
3 - Reboot.
4 - Open terminal and type:
yum install kernel-devel kernel-headers gcc make
5 - When finished, type:
uname -r
(it's gonna print on screen the version)
rpm -q kernel-devel
(it's gonna print on screen the version)
Compare the two versions, if they are equal, proceed to the next step. If not, type on terminal:
yum -y upgrade kernel kernel-devel
Reboot the machine and do the step 5 again, if the versions now are equal, go to the next step. If not, do again the yum -y.... and reboot until they be equal.
6 - After reboot, open termina and enter on root mode:
su root # Type your password
7 - Navigate to the folder: /etc/modprobe.d
8 - Open the archive blacklist.conf (with this command line you will open the archive if exist, if not it will create one automatically):
vi blacklist.conf
9 - Add these lines to the archive:
blacklist vga16fb
blacklist nouveau
blacklist rivafb
blacklist nvidiafb
blacklist rivatv
blacklist lbm-nouveua
options nouveau modeset=0
alias nouveau off
alias lbm-nouveau off
10 - Hit ESC and type :wq to save and close the archive.
11 - Reboot
12 - During the reboot, on the GRUB Screen (selecting system boot screen), choose your system and hit "E". This will open the boot config.
13 - On the kernel line (it starts with linux...) go to the end of the line, hit a space and type: rdblacklist=nouveau
14 - Hit CTRL+X to boot with this command you add.
15 - On the login screen, open the console: Hit CTRL + ALT + F2
16 - Log in with your username and password.
17 - Log in as root again:
su root # Type your password
18 - Call the console level 3 with this command:
init 3
19 - Again enter with your login and password.
20 - Again login as root:
su root # Type your password
21 - Go to the folder where the NVIDIA Driver was downloaded.
22 - Transform the .run file in executable:
chmod +x <Nvidia file>.run
23 - Execute the install file:
./<Nvidia file>.run
24 - Follow the steps on screen to install the driver and at the end reboot the system.
25 - ALMOST DONE! The NVIDIA Driver is installed, Now let's Install DaVinci Resolve! Do the download of the installation file at:
https://www.blackmagicdesign.com/produc ... nciresolve
26 - Unzip the file and open the terminal one more time and for the last time enter in root mode:
su root # Type your password
27 - Navigate to the folder where is the DaVinci Installation.
28 - Type:
sh <DaVinciResolveArchiveName>.sh
29 - Do not run the software yet, still in termina and install zlib, type:
yum install zlib-devel
30 - And to finish, install the libpng12:
yum install libpng12-devel
DONE! Run the software and be happy!!!
Install Tutorial - DaVinci Resolve 12.5 and 14 to CentOS 7
-
- Posts: 1
- Joined: 2017/04/27 01:12:42
Re: Install Tutorial - DaVinci Resolve 12.5 and 14 to CentOS 7
Steps 1 - 25 could be replaced with 1) go to http://elrepo.org/tiki/tiki-index.php and download elrepo-release and use yum to install it. 2) Run nvidia-detect and then yum install the kmod-nvidia package it suggests. 3) Reboot.
The future appears to be RHEL or Debian. I think I'm going Debian.
Info for USB installs on http://wiki.centos.org/HowTos/InstallFromUSBkey
CentOS 5 and 6 are deadest, do not use them.
Use the FAQ Luke
Info for USB installs on http://wiki.centos.org/HowTos/InstallFromUSBkey
CentOS 5 and 6 are deadest, do not use them.
Use the FAQ Luke