Compatible PCI video card

Issues related to hardware problems
Post Reply
Emmaus
Posts: 4
Joined: 2018/12/31 01:34:31

Compatible PCI video card

Post by Emmaus » 2018/12/31 22:09:16

I have been trying to upgrade to a newer distro for the past few years with limited success. My PC is ten years old. My integrated GPU has not been stable with Mint, Fedora 27, and now CentOS 7. With CentOS, I get about 5 to 10 minutes before the GPU gets confused and I have to try to power down the system gracefully before it locks.

I have a spare PCI slot and I would love to buy a video card that is stable with CentOS 7.

Performance requirements are pretty low:
1. control at least one LCD monitor
2. handle typical photos
3. handle solitare

Thanks,

Jeff

Hardware:
MoBo: M3N78-VM
CPU: AMD Athlon II
GPU: NVIDIA GeForce 8200 (MCP78S) (to be replaced)

Here's getinfo driver:

Information for driver problems.

Code: Select all

== BEGIN uname -rmi ==
3.10.0-957.el7.x86_64 x86_64 x86_64
== END   uname -rmi ==

== BEGIN rpm -qa \*-release\* ==
centos-release-7-6.1810.2.el7.centos.x86_64
== END   rpm -qa \*-release\* ==

== BEGIN cat /etc/redhat-release ==
CentOS Linux release 7.6.1810 (Core) 
== END   cat /etc/redhat-release ==

== BEGIN getenforce ==
Enforcing
== END   getenforce ==

== BEGIN free -m ==
              total        used        free      shared  buff/cache   available
Mem:           7695        1049        5264          38        1381        6302
Swap:          7935           0        7935
== END   free -m ==

== BEGIN rpm -qa kernel\* | sort ==
kernel-3.10.0-957.el7.x86_64
kernel-devel-3.10.0-957.el7.x86_64
kernel-headers-3.10.0-957.el7.x86_64
kernel-tools-3.10.0-957.el7.x86_64
kernel-tools-libs-3.10.0-957.el7.x86_64
== END   rpm -qa kernel\* | sort ==

== BEGIN lspci -nn ==
00:00.0 RAM memory [0500]: NVIDIA Corporation MCP78S [GeForce 8200] Memory Controller [10de:0754] (rev a2)
00:01.0 ISA bridge [0601]: NVIDIA Corporation MCP78S [GeForce 8200] LPC Bridge [10de:075c] (rev a2)
00:01.1 SMBus [0c05]: NVIDIA Corporation MCP78S [GeForce 8200] SMBus [10de:0752] (rev a1)
00:01.2 RAM memory [0500]: NVIDIA Corporation MCP78S [GeForce 8200] Memory Controller [10de:0751] (rev a1)
00:01.3 Co-processor [0b40]: NVIDIA Corporation MCP78S [GeForce 8200] Co-Processor [10de:0753] (rev a2)
00:01.4 RAM memory [0500]: NVIDIA Corporation MCP78S [GeForce 8200] Memory Controller [10de:0568] (rev a1)
00:02.0 USB controller [0c03]: NVIDIA Corporation MCP78S [GeForce 8200] OHCI USB 1.1 Controller [10de:077b] (rev a1)
00:02.1 USB controller [0c03]: NVIDIA Corporation MCP78S [GeForce 8200] EHCI USB 2.0 Controller [10de:077c] (rev a1)
00:04.0 USB controller [0c03]: NVIDIA Corporation MCP78S [GeForce 8200] OHCI USB 1.1 Controller [10de:077d] (rev a1)
00:04.1 USB controller [0c03]: NVIDIA Corporation MCP78S [GeForce 8200] EHCI USB 2.0 Controller [10de:077e] (rev a1)
00:06.0 IDE interface [0101]: NVIDIA Corporation MCP78S [GeForce 8200] IDE [10de:0759] (rev a1)
00:07.0 Audio device [0403]: NVIDIA Corporation MCP72XE/MCP72P/MCP78U/MCP78S High Definition Audio [10de:0774] (rev a1)
00:08.0 PCI bridge [0604]: NVIDIA Corporation MCP78S [GeForce 8200] PCI Bridge [10de:075a] (rev a1)
00:09.0 IDE interface [0101]: NVIDIA Corporation MCP78S [GeForce 8200] SATA Controller (non-AHCI mode) [10de:0ad0] (rev a2)
00:0b.0 PCI bridge [0604]: NVIDIA Corporation MCP78S [GeForce 8200] PCI Express Bridge [10de:0569] (rev a1)
00:10.0 PCI bridge [0604]: NVIDIA Corporation MCP78S [GeForce 8200] PCI Express Bridge [10de:0778] (rev a1)
00:12.0 PCI bridge [0604]: NVIDIA Corporation MCP78S [GeForce 8200] PCI Express Bridge [10de:075b] (rev a1)
00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor HyperTransport Configuration [1022:1200]
00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Address Map [1022:1201]
00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor DRAM Controller [1022:1202]
00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Miscellaneous Control [1022:1203]
00:18.4 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Link Control [1022:1204]
02:00.0 VGA compatible controller [0300]: NVIDIA Corporation C77 [GeForce 8200] [10de:0849] (rev a2)
== END   lspci -nn ==

== BEGIN lsusb ==
Bus 002 Device 002: ID 04f9:002b Brother Industries, Ltd HL-5250DN Printer
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 13b1:0041 Linksys Gigabit Ethernet Adapter
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 002: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
== END   lsusb ==

== BEGIN rpm -qa kmod\* kmdl\* ==
kmod-libs-20-23.el7.x86_64
kmod-kvdo-6.1.1.125-5.el7.x86_64
kmod-20-23.el7.x86_64
== END   rpm -qa kmod\* kmdl\* ==

The kitchen sink as needed:

Information for general problems.

Code: Select all

== BEGIN uname -rmi ==
3.10.0-957.el7.x86_64 x86_64 x86_64
== END   uname -rmi ==

== BEGIN rpm -qa \*-release\* ==
centos-release-7-6.1810.2.el7.centos.x86_64
== END   rpm -qa \*-release\* ==

== BEGIN cat /etc/redhat-release ==
CentOS Linux release 7.6.1810 (Core) 
== END   cat /etc/redhat-release ==

== BEGIN getenforce ==
Enforcing
== END   getenforce ==

== BEGIN free -m ==
              total        used        free      shared  buff/cache   available
Mem:           7695        1093        5378          36        1224        6263
Swap:          7935           0        7935
== END   free -m ==

== BEGIN rpm -qa yum\* rpm-\* python | sort ==
python-2.7.5-76.el7.x86_64
rpm-build-4.11.3-35.el7.x86_64
rpm-build-libs-4.11.3-35.el7.x86_64
rpm-libs-4.11.3-35.el7.x86_64
rpm-python-4.11.3-35.el7.x86_64
rpm-sign-4.11.3-35.el7.x86_64
yum-3.4.3-161.el7.centos.noarch
yum-langpacks-0.4.2-7.el7.noarch
yum-metadata-parser-1.1.4-10.el7.x86_64
yum-plugin-fastestmirror-1.1.31-50.el7.noarch
yum-utils-1.1.31-50.el7.noarch
== END   rpm -qa yum\* rpm-\* python | sort ==

== BEGIN ls /etc/yum.repos.d ==
CentOS-Base.repo
CentOS-CR.repo
CentOS-Debuginfo.repo
CentOS-fasttrack.repo
CentOS-Media.repo
CentOS-Sources.repo
CentOS-Vault.repo
== END   ls /etc/yum.repos.d ==

== BEGIN cat /etc/yum.conf ==
[main]
cachedir=/var/cache/yum/$basearch/$releasever
keepcache=0
debuglevel=2
logfile=/var/log/yum.log
exactarch=1
obsoletes=1
gpgcheck=1
plugins=1
installonly_limit=5
bugtracker_url=http://bugs.centos.org/set_project.php?project_id=23&ref=http://bugs.centos.org/bug_report_page.php?category=yum
distroverpkg=centos-release


#  This is the default, if you make this bigger yum won't see if the metadata
# is newer on the remote and so you'll "gain" the bandwidth of not having to
# download the new metadata and "pay" for it by yum not having correct
# information.
#  It is esp. important, to have correct metadata, for distributions like
# Fedora which don't keep old packages around. If you don't like this checking
# interupting your command line usage, it's much better to have something
# manually check the metadata once an hour (yum-updatesd will do this).
# metadata_expire=90m

# PUT YOUR REPOS HERE OR IN separate files named file.repo
# in /etc/yum.repos.d
== END   cat /etc/yum.conf ==

== BEGIN yum repolist all ==
Another app is currently holding the yum lock; waiting for it to exit...

.
.
.

  The other application is: PackageKit
    Memory :  68 M RSS (1.4 GB VSZ)
    Started: Mon Dec 31 14:32:23 2018 - 00:08 ago
    State  : Sleeping, pid: 7353
Loading mirror speeds from cached hostfile
 * base: mirror.genesisadaptive.com
 * extras: mirror.mobap.edu
 * updates: centos2.zswap.net
repo id                         repo name                        status
C7.0.1406-base/x86_64           CentOS-7.0.1406 - Base           disabled
C7.0.1406-centosplus/x86_64     CentOS-7.0.1406 - CentOSPlus     disabled
C7.0.1406-extras/x86_64         CentOS-7.0.1406 - Extras         disabled
C7.0.1406-fasttrack/x86_64      CentOS-7.0.1406 - Fasttrack      disabled
C7.0.1406-updates/x86_64        CentOS-7.0.1406 - Updates        disabled
C7.1.1503-base/x86_64           CentOS-7.1.1503 - Base           disabled
C7.1.1503-centosplus/x86_64     CentOS-7.1.1503 - CentOSPlus     disabled
C7.1.1503-extras/x86_64         CentOS-7.1.1503 - Extras         disabled
C7.1.1503-fasttrack/x86_64      CentOS-7.1.1503 - Fasttrack      disabled
C7.1.1503-updates/x86_64        CentOS-7.1.1503 - Updates        disabled
C7.2.1511-base/x86_64           CentOS-7.2.1511 - Base           disabled
C7.2.1511-centosplus/x86_64     CentOS-7.2.1511 - CentOSPlus     disabled
C7.2.1511-extras/x86_64         CentOS-7.2.1511 - Extras         disabled
C7.2.1511-fasttrack/x86_64      CentOS-7.2.1511 - Fasttrack      disabled
C7.2.1511-updates/x86_64        CentOS-7.2.1511 - Updates        disabled
C7.3.1611-base/x86_64           CentOS-7.3.1611 - Base           disabled
C7.3.1611-centosplus/x86_64     CentOS-7.3.1611 - CentOSPlus     disabled
C7.3.1611-extras/x86_64         CentOS-7.3.1611 - Extras         disabled
C7.3.1611-fasttrack/x86_64      CentOS-7.3.1611 - Fasttrack      disabled
C7.3.1611-updates/x86_64        CentOS-7.3.1611 - Updates        disabled
C7.4.1708-base/x86_64           CentOS-7.4.1708 - Base           disabled
C7.4.1708-centosplus/x86_64     CentOS-7.4.1708 - CentOSPlus     disabled
C7.4.1708-extras/x86_64         CentOS-7.4.1708 - Extras         disabled
C7.4.1708-fasttrack/x86_64      CentOS-7.4.1708 - Fasttrack      disabled
C7.4.1708-updates/x86_64        CentOS-7.4.1708 - Updates        disabled
C7.5.1804-base/x86_64           CentOS-7.5.1804 - Base           disabled
C7.5.1804-centosplus/x86_64     CentOS-7.5.1804 - CentOSPlus     disabled
C7.5.1804-extras/x86_64         CentOS-7.5.1804 - Extras         disabled
C7.5.1804-fasttrack/x86_64      CentOS-7.5.1804 - Fasttrack      disabled
C7.5.1804-updates/x86_64        CentOS-7.5.1804 - Updates        disabled
base/7/x86_64                   CentOS-7 - Base                  enabled: 10,019
base-debuginfo/x86_64           CentOS-7 - Debuginfo             disabled
base-source/7                   CentOS-7 - Base Sources          disabled
c7-media                        CentOS-7 - Media                 disabled
centosplus/7/x86_64             CentOS-7 - Plus                  disabled
centosplus-source/7             CentOS-7 - Plus Sources          disabled
cr/7/x86_64                     CentOS-7 - cr                    disabled
extras/7/x86_64                 CentOS-7 - Extras                enabled:    321
extras-source/7                 CentOS-7 - Extras Sources        disabled
fasttrack/7/x86_64              CentOS-7 - fasttrack             disabled
updates/7/x86_64                CentOS-7 - Updates               enabled:    624
updates-source/7                CentOS-7 - Updates Sources       disabled
repolist: 10,964
== END   yum repolist all ==

== BEGIN egrep 'include|exclude' /etc/yum.repos.d/*.repo ==
== END   egrep 'include|exclude' /etc/yum.repos.d/*.repo ==

== BEGIN sed -n -e "/^\[/h; /priority *=/{ G; s/\n/ /; s/ity=/ity = /; p }" /etc/yum.repos.d/*.repo | sort -k3n ==
== END   sed -n -e "/^\[/h; /priority *=/{ G; s/\n/ /; s/ity=/ity = /; p }" /etc/yum.repos.d/*.repo | sort -k3n ==

== BEGIN cat /etc/fstab ==

#
# /etc/fstab
# Created by anaconda on Sat Dec 29 20:56:32 2018
#
# Accessible filesystems, by reference, are maintained under '/dev/disk'
# See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info
#
/dev/mapper/centos-root /                       xfs     defaults        0 0
UUID=35208e8f-afbb-498d-acde-4d20ce592d21 /boot                   xfs     defaults        0 0
/dev/mapper/centos-home /home                   xfs     defaults        0 0
/dev/mapper/centos-swap swap                    swap    defaults        0 0
== END   cat /etc/fstab ==

== BEGIN df -h ==
Filesystem               Size  Used Avail Use% Mounted on
/dev/mapper/centos-root   50G  5.3G   45G  11% /
devtmpfs                 3.8G     0  3.8G   0% /dev
tmpfs                    3.8G   16M  3.8G   1% /dev/shm
tmpfs                    3.8G  9.8M  3.8G   1% /run
tmpfs                    3.8G     0  3.8G   0% /sys/fs/cgroup
/dev/sdb1               1014M  180M  835M  18% /boot
/dev/mapper/centos-home  873G  193M  873G   1% /home
tmpfs                    770M   44K  770M   1% /run/user/1000
== END   df -h ==

== BEGIN fdisk -lu ==

Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes, 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk label type: dos
Disk identifier: 0x00076394

   Device Boot      Start         End      Blocks   Id  System
/dev/sdb1   *        2048     2099199     1048576   83  Linux
/dev/sdb2         2099200  1953523711   975712256   8e  Linux LVM

Disk /dev/sda: 1000.2 GB, 1000204886016 bytes, 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk label type: dos
Disk identifier: 0x088e854c

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *        2048     2099199     1048576   83  Linux
/dev/sda2         2099200  1953523711   975712256   8e  Linux LVM

Disk /dev/mapper/centos-root: 53.7 GB, 53687091200 bytes, 104857600 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/mapper/centos-swap: 8321 MB, 8321499136 bytes, 16252928 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/mapper/fedora-swap: 8376 MB, 8376025088 bytes, 16359424 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/mapper/fedora-home: 937.1 GB, 937062039552 bytes, 1830199296 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/mapper/fedora-root: 53.7 GB, 53687091200 bytes, 104857600 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/mapper/centos-home: 937.1 GB, 937112371200 bytes, 1830297600 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes

== END   fdisk -lu ==

== BEGIN blkid ==
/dev/sdb1: UUID="35208e8f-afbb-498d-acde-4d20ce592d21" TYPE="xfs" 
/dev/sdb2: UUID="G10Q73-0Ncq-FuPt-2Dc2-7KVI-qYOx-iDtkAQ" TYPE="LVM2_member" 
/dev/sda1: UUID="1012ee66-f48f-457e-80d8-f5545d360a14" TYPE="ext4" 
/dev/sda2: UUID="r9WTbU-9P4h-Cv2x-h05i-nTQQ-HfiT-SAOuXN" TYPE="LVM2_member" 
/dev/mapper/centos-root: UUID="c1defc20-bd3c-4086-8a82-f275d2492cbc" TYPE="xfs" 
/dev/mapper/centos-swap: UUID="71cf2e90-f185-4edd-bce5-59f1083041c3" TYPE="swap" 
/dev/mapper/fedora-swap: UUID="e103392e-5fd8-46d3-b38c-9e2e87985893" TYPE="swap" 
/dev/mapper/fedora-home: UUID="69b6a1c2-ccc7-498a-84ed-27e9caa0aeb9" TYPE="ext4" 
/dev/mapper/fedora-root: UUID="057d050b-03b5-4e32-b90d-7ced80e8bdee" TYPE="ext4" 
/dev/mapper/centos-home: UUID="05d58dd8-0ae3-4696-9246-8da6af3b158c" TYPE="xfs" 
== END   blkid ==

== BEGIN cat /proc/mdstat ==
Personalities : 
unused devices: <none>
== END   cat /proc/mdstat ==

== BEGIN pvs ==
  PV         VG     Fmt  Attr PSize    PFree
  /dev/sda2  fedora lvm2 a--  <930.51g    0 
  /dev/sdb2  centos lvm2 a--  <930.51g 4.00m
== END   pvs ==

== BEGIN vgs ==
  VG     #PV #LV #SN Attr   VSize    VFree
  centos   1   3   0 wz--n- <930.51g 4.00m
  fedora   1   3   0 wz--n- <930.51g    0 
== END   vgs ==

== BEGIN lvs ==
  LV   VG     Attr       LSize    Pool Origin Data%  Meta%  Move Log Cpy%Sync Convert
  home centos -wi-ao----  872.75g                                                    
  root centos -wi-ao----   50.00g                                                    
  swap centos -wi-ao----    7.75g                                                    
  home fedora -wi-a----- <872.71g                                                    
  root fedora -wi-a-----   50.00g                                                    
  swap fedora -wi-a-----    7.80g                                                    
== END   lvs ==

== BEGIN rpm -qa kernel\* | sort ==
kernel-3.10.0-957.el7.x86_64
kernel-devel-3.10.0-957.el7.x86_64
kernel-headers-3.10.0-957.el7.x86_64
kernel-tools-3.10.0-957.el7.x86_64
kernel-tools-libs-3.10.0-957.el7.x86_64
== END   rpm -qa kernel\* | sort ==

== BEGIN lspci -nn ==
00:00.0 RAM memory [0500]: NVIDIA Corporation MCP78S [GeForce 8200] Memory Controller [10de:0754] (rev a2)
00:01.0 ISA bridge [0601]: NVIDIA Corporation MCP78S [GeForce 8200] LPC Bridge [10de:075c] (rev a2)
00:01.1 SMBus [0c05]: NVIDIA Corporation MCP78S [GeForce 8200] SMBus [10de:0752] (rev a1)
00:01.2 RAM memory [0500]: NVIDIA Corporation MCP78S [GeForce 8200] Memory Controller [10de:0751] (rev a1)
00:01.3 Co-processor [0b40]: NVIDIA Corporation MCP78S [GeForce 8200] Co-Processor [10de:0753] (rev a2)
00:01.4 RAM memory [0500]: NVIDIA Corporation MCP78S [GeForce 8200] Memory Controller [10de:0568] (rev a1)
00:02.0 USB controller [0c03]: NVIDIA Corporation MCP78S [GeForce 8200] OHCI USB 1.1 Controller [10de:077b] (rev a1)
00:02.1 USB controller [0c03]: NVIDIA Corporation MCP78S [GeForce 8200] EHCI USB 2.0 Controller [10de:077c] (rev a1)
00:04.0 USB controller [0c03]: NVIDIA Corporation MCP78S [GeForce 8200] OHCI USB 1.1 Controller [10de:077d] (rev a1)
00:04.1 USB controller [0c03]: NVIDIA Corporation MCP78S [GeForce 8200] EHCI USB 2.0 Controller [10de:077e] (rev a1)
00:06.0 IDE interface [0101]: NVIDIA Corporation MCP78S [GeForce 8200] IDE [10de:0759] (rev a1)
00:07.0 Audio device [0403]: NVIDIA Corporation MCP72XE/MCP72P/MCP78U/MCP78S High Definition Audio [10de:0774] (rev a1)
00:08.0 PCI bridge [0604]: NVIDIA Corporation MCP78S [GeForce 8200] PCI Bridge [10de:075a] (rev a1)
00:09.0 IDE interface [0101]: NVIDIA Corporation MCP78S [GeForce 8200] SATA Controller (non-AHCI mode) [10de:0ad0] (rev a2)
00:0b.0 PCI bridge [0604]: NVIDIA Corporation MCP78S [GeForce 8200] PCI Express Bridge [10de:0569] (rev a1)
00:10.0 PCI bridge [0604]: NVIDIA Corporation MCP78S [GeForce 8200] PCI Express Bridge [10de:0778] (rev a1)
00:12.0 PCI bridge [0604]: NVIDIA Corporation MCP78S [GeForce 8200] PCI Express Bridge [10de:075b] (rev a1)
00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor HyperTransport Configuration [1022:1200]
00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Address Map [1022:1201]
00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor DRAM Controller [1022:1202]
00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Miscellaneous Control [1022:1203]
00:18.4 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Link Control [1022:1204]
02:00.0 VGA compatible controller [0300]: NVIDIA Corporation C77 [GeForce 8200] [10de:0849] (rev a2)
== END   lspci -nn ==

== BEGIN lsusb ==
Bus 002 Device 002: ID 04f9:002b Brother Industries, Ltd HL-5250DN Printer
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 13b1:0041 Linksys Gigabit Ethernet Adapter
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 002: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
== END   lsusb ==

== BEGIN rpm -qa kmod\* kmdl\* ==
kmod-libs-20-23.el7.x86_64
kmod-kvdo-6.1.1.125-5.el7.x86_64
kmod-20-23.el7.x86_64
== END   rpm -qa kmod\* kmdl\* ==

== BEGIN ifconfig -a ==
enp0s2f1u3: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.0.2  netmask 255.255.255.0  broadcast 192.168.0.255
        inet6 fe80::a034:9f78:3913:9315  prefixlen 64  scopeid 0x20<link>
        ether 94:10:3e:b8:91:a7  txqueuelen 1000  (Ethernet)
        RX packets 181547  bytes 265880245 (253.5 MiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 99919  bytes 6297178 (6.0 MiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 100  bytes 9552 (9.3 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 100  bytes 9552 (9.3 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

virbr0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        inet 192.168.122.1  netmask 255.255.255.0  broadcast 192.168.122.255
        ether 52:54:00:57:2d:5b  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

virbr0-nic: flags=4098<BROADCAST,MULTICAST>  mtu 1500
        ether 52:54:00:57:2d:5b  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

== END   ifconfig -a ==

== BEGIN brctl show ==
bridge name	bridge id		STP enabled	interfaces
virbr0		8000.525400572d5b	yes		virbr0-nic
== END   brctl show ==

== BEGIN route -n ==
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
0.0.0.0         192.168.0.1     0.0.0.0         UG    100    0        0 enp0s2f1u3
192.168.0.0     0.0.0.0         255.255.255.0   U     100    0        0 enp0s2f1u3
192.168.122.0   0.0.0.0         255.255.255.0   U     0      0        0 virbr0
== END   route -n ==

== BEGIN sysctl -a | grep .rp_filter ==
sysctl: reading key "net.ipv6.conf.all.stable_secret"
sysctl: reading key "net.ipv6.conf.default.stable_secret"
sysctl: reading key "net.ipv6.conf.enp0s2f1u3.stable_secret"
sysctl: reading key "net.ipv6.conf.lo.stable_secret"
sysctl: reading key "net.ipv6.conf.virbr0.stable_secret"
sysctl: reading key "net.ipv6.conf.virbr0-nic.stable_secret"
net.ipv4.conf.all.arp_filter = 0
net.ipv4.conf.all.rp_filter = 1
net.ipv4.conf.default.arp_filter = 0
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.enp0s2f1u3.arp_filter = 0
net.ipv4.conf.enp0s2f1u3.rp_filter = 1
net.ipv4.conf.lo.arp_filter = 0
net.ipv4.conf.lo.rp_filter = 0
net.ipv4.conf.virbr0.arp_filter = 0
net.ipv4.conf.virbr0.rp_filter = 1
net.ipv4.conf.virbr0-nic.arp_filter = 0
net.ipv4.conf.virbr0-nic.rp_filter = 1
== END   sysctl -a | grep .rp_filter ==

== BEGIN ip rule show ==
0:	from all lookup local 
32766:	from all lookup main 
32767:	from all lookup default 
== END   ip rule show ==

== BEGIN ip route show ==
default via 192.168.0.1 dev enp0s2f1u3 proto dhcp metric 100 
192.168.0.0/24 dev enp0s2f1u3 proto kernel scope link src 192.168.0.2 metric 100 
192.168.122.0/24 dev virbr0 proto kernel scope link src 192.168.122.1 
== END   ip route show ==

== BEGIN cat /etc/resolv.conf ==
# Generated by NetworkManager
search Home
nameserver 192.168.0.1
== END   cat /etc/resolv.conf ==

== BEGIN egrep 'net|hosts' /etc/nsswitch.conf ==
#hosts:     db files nisplus nis dns
hosts:      files dns myhostname
#networks:   nisplus [NOTFOUND=return] files
#netmasks:   nisplus [NOTFOUND=return] files     
netmasks:   files
networks:   files
netgroup:   nisplus sss
== END   egrep 'net|hosts' /etc/nsswitch.conf ==

== BEGIN chkconfig --list | grep -Ei 'network|wpa' ==

Note: This output shows SysV services only and does not include native
      systemd services. SysV configuration data might be overridden by native
      systemd configuration.

      If you want to list systemd services use 'systemctl list-unit-files'.
      To see services enabled on particular target use
      'systemctl list-dependencies [target]'.

network        	0:off	1:off	2:on	3:on	4:on	5:on	6:off
== END   chkconfig --list | grep -Ei 'network|wpa' ==


User avatar
TrevorH
Forum Moderator
Posts: 25576
Joined: 2009/09/24 10:40:56
Location: Brighton, UK

Re: Compatible PCI video card

Post by TrevorH » 2018/12/31 22:37:25

According to the Asus website, that motherboard is old but it does have a PCIe x16 slot so asking for "PCI" graphics cards is unnecessarily restricting yourself to really really ancient cards. It's most likely PCIe v1 but it should still make it easier to find a compatible one.
CentOS 5 died in March 2017 - migrate NOW!
Full time Geek, part time moderator. Use the FAQ Luke

Emmaus
Posts: 4
Joined: 2018/12/31 01:34:31

Re: Compatible PCI video card

Post by Emmaus » 2019/01/03 05:41:44

The PCIe x16 slot is available too.

The ASUS uses guide says the motherboard supports PCI Express 2.0 devices.

Thanks,

Jeff

User avatar
jlehtone
Posts: 2148
Joined: 2007/12/11 08:17:33
Location: Finland

Re: Compatible PCI video card

Post by jlehtone » 2019/01/03 12:37:09

How is the PSU in your system? That also sets a limit on what you can choose.

Emmaus
Posts: 4
Joined: 2018/12/31 01:34:31

Re: Compatible PCI video card

Post by Emmaus » 2019/01/07 05:13:14

It has an Agi 776 chassis with 350 W power supply.

http://www.amtechonline.com/fx776bk350w.html

Thanks,

JLT

User avatar
jlehtone
Posts: 2148
Joined: 2007/12/11 08:17:33
Location: Finland

Re: Compatible PCI video card

Post by jlehtone » 2019/01/08 09:16:00

The thing with PSU is that if it is too weak, then there can be problems. 350W should be plenty for the integrated graphics and sufficient for several low to mid-range discrete card models. However, PSU could become weaker over time (although they usually just fail totally).

I've used NVidia cards with NVidia propietary driver (from ELRepo). Overall, they have been very stable. Geforce GT 1030 could be suitable.

PCIe 3.0 ought to be backwards compatible with 2.0.

Emmaus
Posts: 4
Joined: 2018/12/31 01:34:31

Re: Compatible PCI video card

Post by Emmaus » 2019/01/13 05:38:59

NVIDIA says the GeForce GT 1030 will work with a PCIe 2.0 slot. Here is their response:

Code: Select all

Yes, the PCIe 3.0 graphics card will be backward compatible with PCIe 2.0 slot on the motherboard. 
GeForce GT 1030 graphics card will work with PCIe 2.0 slot and PCIe 3.0.
I will give it a try after I look into the proprietary driver. The proprietary driver for my current GPU gave me a lime green screen when I tried to install it.

Thanks,

Jeff

Post Reply